Need help?Do you have a question about the Dräger Flame 1500 and is the answer not in the manual?
General| Sensor type | Optical |
|---|---|
| Alarm volume | 85 dB at 3 m (10 ft) |
| Operating temperature | -10 °C to +55 °C (-14 °F to 131 °F) |
| Certifications | EN 14604 |
| Humidity | 15 % to 95 % relative humidity, non-condensing |
| Detection Principle | Light scattering |
Essential instructions for safe product usage, user qualifications, and handling precautions.
Safety requirements related to ATEX directive and installation site conditions.
Definitions of warning signs (WARNING, CAUTION, NOTICE) used in the document.
Information on registered trademarks and where to find further details.
Introduction to the Dräger Flame 1500, its technology, and integration capabilities.
Detailed explanation of the detector's features, including sensitivity, field of view, and optical verification.
Specifies intended application areas and outlines restrictions for the flame detector.
Lists certifications and standards the detector complies with for hazardous environments.
Describes the information presented on the detector's label and its meaning.
Guidelines for selecting an optimal mounting position for the flame detector.
Importance of analyzing the detector's field of view for adequate hazard coverage.
Specifies voltage supply requirements and cable selection criteria for the detector.
Procedures for mechanical and electrical installation of the flame detector.
Steps required to bring the flame detector into operation after installation.
Common detector errors, their causes, and recommended solutions.
Recommended schedule for inspection, functional testing, and detailed inspections.
Step-by-step guide for performing routine maintenance on the flame detector.
Instructions for storing the product in its original packaging.
Guidelines for transporting the product in its original packaging.
Information on how to properly dispose of the product, avoiding household waste.
To Next Page