Dräger Perseus A500 Reprocessing Instructions

Reprocessing instructions | Perseus A500 29
Reprocessing
TurboVent 2 blower module
A special holder is required for the blower module. The holder must be connected
to a flushing connection in the load carrier.
1. Insert the blower module (A) in the holder (B). Make sure that the locking
mechanism is heard to click into place.
2. Fit the cap (C).
3857338574

Dräger Perseus A500 Specifications

General

Brand	Dräger
Model	Perseus A500
Category	Medical Equipment
Language	English