Dräger Resuscitaire WBR82 - X-Ray Tray Accessory (Optional)

PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
5 - 19
X-Ray Tray Accessory (Optional)
1. To install an x-ray cassette, perform the following:
a. Swing the warmer module to the right or left of center as required to position the x-ray device.
b. Lift the left or right bassinet side panel up.
c. Slide the x-ray tray out.
d. Place the x-ray cassette on the tray.
e. Return the x-ray tray to the bassinet.
f. Align the x-ray tray as desired with the markings on the x-ray cassette and the relative markings
on the inside of the bassinet walls.
2. When the x-ray is complete, perform the following:
a. Remove the x-ray cassette.
b. Return the x-ray tray.
c. Place the warmer module in its normal operating position.