PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
4 - 6
Assembly of the Resuscitaire Radiant Warmer (RW82)
NOTE:
The mounting hardware is stored in a bag in the pass-through drawer.
Warmer
1. Remove the two #8-32 x ¾" screws (A) that secure the
controller (B) to the head support plate (C). Retain the
two #8-32 x ¾" screws.
2. Slide the controller (B) out through the front of the
upper post (D).
WARNING:
Use two persons of sufficient strength to lift the
upper post. Failure to do so could result in
personal injury or equipment damage.
3. Using two persons of sufficient strength, lift the upper
post (D) and rest it on top of the opening in the column
(E) of the bassinet/cart assembly (F).
9020
A
B
C
D
D
E
F
To Next Page
Loading...
