Dräger Resuscitaire WBR82 - Mounting of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82)

PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
4 - 13
Mounting of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82)
WARNING:
The wall mount bracket installation must be appropriately certified that it meets or exceeds the
pull-out force before mounting the Resuscitaire Wall Mounted Radiant Warmer. Failure to do so
can result in an unsafe installation that could cause equipment damage or personal or patient
injury.
WARNING:
Do not attach the mounting bracket to dry wall unless the mounting bolts are also attached to
structural members of sufficient strength to meet the pull-out force specification. Failure to do so
can result in an unsafe installation that could cause equipment damage or personal or patient
injury.
WARNING:
Consult a structural design professional to determine the specific construction and installation
details to meet the installation specifications. Failure to do so can result in an unsafe installation
that could cause equipment damage or personal or patient injury.
WARNING:
The wall bracket mounting bolts must withstand a direct pull-out force of 600 lbs (272 kg) or
150 lbs (68 kg) per bolt exerted perpendicular to the wall. Failure to do so can result in an
unsafe installation that could cause equipment damage or personal or patient injury.
1. Select the location and appropriate height of the wall bracket mounting bolts.