EasyManua.ls Logo

Dräger X-am 5100 - 1 For Your Safety; Follow the Instructions for Use; Maintenance; Accessories

Dräger X-am 5100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Dräger X-am 5100
For Your Safety
1 For Your Safety
1.1 Follow the Instructions for Use
Any use of the instrument requires full understanding and strict
observation of the Instructions for Use supplied with the
instrument. The instrument is only to be used for the purposes
specified here.
1.2 Maintenance
The maintenance intervals and measures specified in this
Technical Manual as well as the specifications in the
Instructions for Use/data sheets
1
for the DrägerSensor
® 2
sensors used must be carefully observed. Repairs to the
instrument may only be carried out by trained service
personnel.
1.3 Accessories
Only the accessories specified in the ordering list may be used.
1.4 Safe coupling with electrical devices
Devices which are not mentioned in the Instructions for Use or
in this Technical Manual can only be coupled electronically
after consultation with the manufacturers or an expert.
1.5 Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas,
which have been tested and approved according to national,
European or international Explosion Protection Regulations,
may only be used under the conditions explicitly specified in
the approval and with consideration of the relevant legal
regulations. Devices and components must not be altered.
The use of faulty or incomplete parts is forbidden.
The applicable regulations must be observed at all times when
carrying out repairs on these devices or components.
1.6 Safety symbols used in this Technical
Manual
This Technical Manual contains a number of warnings for risks
and hazards which might occur when using the instrument.
These warnings contain signal words to alert you to the degree
of hazard you may encounter. These signal words and
corresponding hazards are as follows:
1 Instructions for Use/data sheets for the utilized sensors and the PC software
CC-Vision for Dräger X-am 5100 can be downloaded on the product page
of the X-am 5100 at the following Internet address: www.draeger.com. See
also the enclosed Instructions for Use and data sheets for the sensors used.
2 DrägerSensor
®
is a registered trademark of Dräger.
WARNING
Death or serious physical injury may occur as
a result of a potential hazard situation if appropriate
precautionary measures are not taken.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, could result in injury or damage to property or
to the environment. Can also be used to warn against
any wanton actions.
NOTICE
Additional information on the use of the product.
!
!
i
i

Other manuals for Dräger X-am 5100

Related product manuals