Draytek Vigor2133 - Page 15

Vigor2133 Series User’s Guide
3
LAN1/2/3/4
Interface Description
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep
for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with
the factory default configuration.
Wireless LAN
ON/OFF/WPS
(for “n / ac”
model)
WLAN On - Press the button and release it within 2 seconds. When the
wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn off
the WLAN function. When the wireless function is not ready, the LED
will be off.
WPS - When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client’s device making
network connection through WPS.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
WAN Connector for remote networked devices.
Phone2/Phone1
(for “V” model)
Connector of analog phone for VoIP communication.
ON/OFF Power Switch.
PWR Connector for a power adapter.