Vigor2133 Series User’s Guide
333
Through synchronization.
Click OK to save these settings.
V
V
I
I
-
-
1
1
-
-
9
9
S
S
N
N
M
M
P
P
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and DES)
and authentication method (support MD5 and SHA) for the management needs.
Available settings are explained as follows:
Item Description
Enable SNMP Agent Check it to enable this function.
Get Community Set the name for getting community by typing a proper
character. The default setting is public.
The maximum length of the text is limited to 23 characters.
Set Community Set community by typing a proper name. The default setting
is private.
The maximum length of the text is limited to 23 characters.
Manager Host IP (IPv4) Set one host as the manager to execute SNMP function.
Please type in IPv4 address to specify certain host.
To Next Page
Loading...
Need help?
General
