Name Display the profile name of that index.
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
Available settings are explained as follows:
Item Description
Profile Name Type the name of the profile. The maximum length of the
name you can set is 32 characters.
Enable this account Check it to enable such account profile.
Accept Any Peer ID Click to accept any peer regardless of its identity.
Accept Subject
Alternative Name
Click to check one specific field of digital signature to accept
the peer with matching value. The field can be IP Address,
Domain, or E-mail. The box under the Type will appear
according to the type you select and ask you to fill in
corresponding setting.
Accept Subject Name Click to check the specific fields of digital signature to
accept the peer with matching value. The field includes
Country (C), State (ST), Location (L), Organization (O),
Organization Unit (OU), Common Name (CN), and Email
(E).
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
