2. The following page will be open for you to type in the IP address information originally
provided by your ISP.
Available settings are explained as follows:
Item Description
Host Name Type the name of the host.
Note: The maximum length of the host name you can set is
39 characters.
MAC Some Cable service providers specify a specific MAC address
for access authentication. In such cases you need to enter
the MAC address.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
3. After finished the settings above, click Next for viewing summary of such connection.
To Next Page
Loading...
Need help?
General
