Parameter Description
enable Enable or disable DNS Filter.
ON: enable.
OFF: disable.
syslog Determine the content of records transmitting to Syslog.
P: Pass. Records for the packets passing through DNS filter will be
sent to Syslog.
B: Block. Records for the packets blocked by DNS filter will be
sent to Syslog.
A: All. Records for the packets passing through or blocked by DNS
filter will be sent to Syslog.
N: None. No record will be sent to Syslog.
wcf [INDEX] set WCF for DNS Filter Local Setting
ucf [INDEX] set UCF for DNS Filter Local Setting
service WCF_PROFILE WCF_PROFILE: Specify a WCF profile as the base of DNS filtering.
Type a number to indicate the index number of WCF profile (1 is
first profile, 2 is second profile, and so on ...).
cachetime [CACHE_TIME] CACHE_TIME: It means to set the time for cache to live (available
values are 1 to 24; 1 is one hour, 2 is two hours, and so on ...) for
DNS filter.
blockpage DNS sends block page for redirect port. When a web page is
blocked by DNS filter, the router system will send a message page
to describe that the page is not allowed to be visisted.
ON: Enable the function of displaying message page.
OFF: Disable the function of displaying message page.
SHOW: Display the function of displaying message page is ON or
OFF.
profile_show Display the table of the DNS filter profile.
profile_edit Modify the content of the DNS filter profile.
-n PROFILE_NAME PROFILE_NAME: Type the name of the DNS filter profile that you
want to modify.
-l N|P|B|A Specify the log type of the profile.
P: Pass.
B: Block.
A: All.
N: None.
-w WCF_PROFILE WCF_PROFILE: Type the index number of the WCF profile.
-u UCF_PROFILE UCF_PROFILE: Type the index number of the UCF profile.
-c CACHE_TIME -c means to set the cache time for DNS filter.
CACHE_TIME: It means to set the time for cache to live (available
values are 1 to 24; 1 is one hour, 2 is two hours, and so on ...) for
DNS filter.
local_bw [value] Enable /disable the Black/White List.
e: Enable Black/White List.
d: Disable Black/White List.
p: Pass action.
b: Block action.
a [type index][START_IP][END/MASK_IP]: Set address type
(0=mask, 1=single, 2=any, 3=range, 4=group).
g [item number][group index]: select group index (1 ~ 192) for
group and objects type.
o [item number][object index]: select object index (1~ 32) for
group and objects type.
s: show config setting
To Next Page
Loading...
