It provides 2 daemons for LAN side IPv6 address configuration. One is SLAAC(stateless) and
the other is DHCPv6 (Stateful) server.
Available settings are explained as follows:
Item Description
Enable Check the box to enable the configuration of LAN 1 IPv6
Setup.
WAN Primary Interface Use the drop down list to specify a WAN interface for IPv6.
Static IPv6 Address
configuration
IPv6 Address –Type static IPv6 address for LAN.
Prefix Length – Type the fixed value for prefix length.
Add – Click it to add a new entry.
To Next Page
Loading...
Need help?
General
