15
Click OK on t hat page t o apply t he changes.
3. Go t o [WAN] > [Internet Access]
Set t he WAN1 Access Mode t o MPoA / Static or Dynamic IP, t hen click t he
Details Page but t on t o proceed:
4. In t he MPoA / St at ic or Dynamic IP set t ings:
Select t he Enable opt ion and select Obtain an IP address automatically which
will obt ain an IP from t he ISP using DHCP.
If your ISP has provided a st at ic IP range, wit h a Net work address and a Subnet
Mask, specify t hat wit h t he Specify an IP address opt ion.
To Next Page