Vigor2830 Series User’s Guide
91
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Available settings are explained as follows:
Item Description
Username
Type the name obtained from the broker. It is suggested for
you to apply another username and password for
http://gogonet.gogo6.com/page/freenet6-account
.
Password
Type the password assigned with the user name.
Confirm Password
Type the password again to make the confirmation.
Tunnel Broker
Type the address for the tunnel broker IP, FQDN or an
optional port number.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
