Draytek Vigor2830 Series User Manual

Vigor2830 Series User’s Guide
127
Wizard Mode
This mode will guide you to configure the common settings
with several pages.
Advance Mode
This mode allows you to modify all the settings in one
page.
Click Index 1 to access into the following page for configuring load-balance policy. Here we
choose Advance Mode as an example.
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click Index 1. The setting page will appear as follows:
Available settings are explained as follows:
Item Description
Source IP
Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified
WAN interface.
Src IP End - Type the source IP end for the specified
WAN interface. If this field is blank, it means that all the
source IPs inside the LAN will be passed through the WAN
interface.
Destination IP
Any – Any IP can be treated as the destination IP.
Dest IP Start- Type the destination IP start for the
specified WAN interface.
Dest IP End - Type the destination IP end for the specified
WAN interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
3. Click Next to get the following page.

Draytek Vigor2830 Series Specifications

General

Brand	Draytek
Model	Vigor2830 Series
Category	Firewall
Language	English