Vigor2830 Series User’s Guide
219
Available settings are explained as follows:
Item Description
Name
Display the name of such class.
Tag packets as
Check the box to tag the packets with the header selected in
the drop down list for this class.
NO
Display the number of the rules defined for such rule.
Status
Display if such rule is enabled (Active) or not.
Local Address
Display the local IP address (on LAN) for the rule.
Remote Address
Display the remote IP address (on LAN/WAN) for the rule.
DiffServ CodePoint
Display the levels of the data for processing with QoS
control.
Service Type
Display the service type of the data for processing with QoS
control
3. For adding a new rule, click Add to open the following page.
Available settings are explained as follows:
Item Description
ACT
Check this box to invoke these settings.
Ethernet Type
Please specify which protocol (IPv4 or IPv6) will be used
for this rule.
Local Address
Click the Edit button to set the local IP address (on LAN)
for the rule.
Remote Address
Click the Edit button to set the remote IP address (on
LAN/WAN) for the rule.