Draytek Vigor2830 Series - Page 233

Vigor2830 Series User’s Guide
221
2. After you click the Edit link, you will see the following page.
3. For adding a new service type, click Add to open the following page.
Available settings are explained as follows:
Item Description
Service Name
Type in a new service for your request.
Service Type
Choose the type (TCP, UDP or TCP/UDP or other) for the
new service.
Port Configuration
Type - Click Single or Range as the Type. If you select
Range, you have to type in the starting port number and the
end porting number on the boxes below.
Port Number – Type in the starting port number and the
end porting number here if you choose Range as the type.