Vigor2830 Series User’s Guide
383
3. Setup a user account for the FTP service by using USB Application >>USB User
Management. Click Enable to enable FTP/Samba User account. Here we add a new
account "user1" and assign authorities “Read”, “Write” and “List” to it.
4. Click OK to save the configuration.
5. Make sure the FTP service is running properly. Please open a browser and type
ftp://192.168.1.1
. Use the account "user1" to login.
6. When the following screen appears, it means the FTP service is running properly.
To Next Page
Loading...
Need help?
General
