Draytek Vigor2830 Series User Manual

Vigor2830 Series User’s Guide
78
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（RFC1058）specifying how routers exchange routing
tables information. Click Enable RIP for activating this
function.
Bridge Mode
If you choose Bridged IP as the protocol, you can check
this box to invoke the function. The router will work as a
bridge modem.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically
and allows you type in IP address manually.
WAN IP Alias - If you have multiple public IP addresses
and would like to utilize them on the WAN interface, please
use WAN IP Alias. You can set up to 8 public IP addresses
other than the current one you are using. Notice that this
setting is available for WAN1 only. Type the additional
WAN IP address and check the Enable box. Then click OK
to exit the dialog.

Draytek Vigor2830 Series Specifications

General

Brand	Draytek
Model	Vigor2830 Series
Category	Firewall
Language	English