Dremel 3D40 FLEX User Manual

12
1. Place box on table, cut tape, and open.
2. Remove top insert.
3. Remove 3D40 and place on table.
4. Open lid and remove top insert.
5. Raise build platform by lifting from both sides.
6. Open door and remove middle insert.
7. Remove bottom insert.
Tip: Keep packaging for future transportation
and storage.
Unpacking
DM 2610039151 10-18.qxp_3D40 10/8/18 10:34 AM Page 12

Dremel 3D40 FLEX Specifications

General

Brand	Dremel
Model	3D40 FLEX
Category	3D Printers
Language	English