Settings Menu
LED Status Indicator
LED Indicator Timer
Date
Date Stamp
Instant Record
Video Standard
The Ghost 4K gives you the option to turn the LED status indicator, and LCD
backlight o, to conserve battery life.
Your ghost 4K status indicator and LED backlight can be set to turn o after
a specific duration, in order to save battery. Select from 5s, 10s, 20s or 1m
durations, or turn the timer o if you’d prefer the status indicator to remain on.
Set the correct time and date.
Enabling the date stamp will imprint the time and date onto the bottom-right
corner of your photos and videos.
Enabling instant record allows you to power your Ghost 4K on, and start
recording with a single short press of the button.
Pressing and holding the button will power your camera on in idle mode.
Filter your frame rate options for faster navigation through PAL, NTSC, or
Cinematic frame rates. PAL allows you to select 25, 50, 100 or 200 frames per
second. NTSC frame rates are 30, 60, 120 and 240 frames per second, and
cinematic mode enables 24 and 48 frames per second.
Please see page 12 for a full list of available frame rates at each resolution setting.
To Next Page
Loading...
Need help?
General
