DRIFT GHOST 4K User Manual

25
EN
Updating Firmware
To download the latest Ghost 4K firmware please visit:
www.driftinnovation.com/blogs/support/Ghost4k
To install the update:
1. Format your memory card in the Ghost 4K settings menu. Make sure to save
any files you want before formatting, as this will delete all files.
2. Connect your camera to your computer.
3. Find your memory card (in your computer’s devices list), then drag and
drop the .bin firmware file from your downloads folder, into the root of your
memory card – beside, but not inside the DCIM folder.
4. Eject your camera from your computer, power it on, and the update will begin
automatically.

DRIFT GHOST 4K Specifications

General

Connectivity	Wi-Fi, Bluetooth
Image Sensor Size	1/2.3 inch
Sensor Resolution	12MP
Weight	120g
Image Stabilization	Electronic Image Stabilization (EIS)
Resolution	3840 x 2160
Battery Life	Up to 3 hours
Waterproof	with external case
Storage	MicroSD card up to 128GB
Lens	140° wide-angle lens
Dimensions	43mm (H) x 82mm (W) x 31mm (D)