Drive S300 - To Make the Battery Last Longer

46
• On the Device ID tab you can change the device name.
Note The device name must begin with a letter, consist of letters from A to Z,
numbers from 0 to 9, and cannot contain spaces. Use the underscore
character to separate words.
The device name is very important and used to identify the device in the following
situations:
• Synchronizing with a PC
• Connecting to a network
• Restoring information from a backup
Note If you synchronize multiple devices with the same PC, each device must
have a unique name.
To make the battery last longer
• Tap Start > Settings > System tab > Power. On the Advanced tab, you can
specify when your device turns off to conserve battery power. For optimum
conservation, specify 3 minutes or less.
• Use the AC adapter to plug your device into external power whenever
possible, especially when using a MicroSD card or when using a modem or
other peripherals.
• Adjust the backlight settings.
To set the backlight
To enter the backlight settings, you can tap Start > Settings > System tab >
Backlight.
• Brightness tab: Move the sliders right to increase the brightness, or left to
decrease the brightness.
• Battery power tab or External power tab: Select the check box, and specify
the time delay.
Phone settings
To enter the phone settings, tap Menu > Options from the phone keypad screen
or tap Start > Settings > Personal tab > Phone
• Phone tab: you can customize phone settings, such as the ring type (the
way that you are notified of incoming calls), the ring tone (used for incoming
calls), and the keypad tone (used when entering phone numbers). Also you
can enable/disable or change the PIN.
Tip To use custom *.wav, *.mid, *.mp3, or *.wma files as ring tones, use
ActiveSync on your PC to copy the file to the File Explorer/My
Documents/My Ringtones folder or
/My Documents folder on your device.
Then you can select the sound from the Ring tone list. For more
information about copying files to your device, see ActiveSync Help on your