59
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in discoverable mode.
2. Tap Yes when portended to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection. The passcode must be between
1 and 16 characters.
4. Tap Next.
5. Tap Finish to start exchanging information with the other device.
To rename a Bluetooth partnership
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Edit.
4. Enter a new name for the partnership.
5. Tap Save.
To delete a Bluetooth partnership
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. Tap Delete from the shortcut menu.
To beam information using Bluetooth
1. On the device, tap and hold an item to beam. The item could be an appointment
in your calendar, a task, a contact card, or a file.
2. Tap Beam [type of item].
3. Tap the device name to which you want to send the beam. The item is beamed
to the device you selected.
Note If the device you want to beam to does not appear in the box, make sure that it
is turned on, discoverable, and within close range (10 meters) of your device.
To use a Bluetooth device as a modem
A Bluetooth-enabled can be used as a modem for your device, which can create a
Bluetooth modem connection on your device and then send information to another
device. The device relays the information over the network and then sends back to
your device any information that you had requested over the connection.
Once a modem connection is created, it can be reused as a modem for any time.
Make sure that your device and the destination device are turned on with Bluetooth
on and the devices within close range.
To configure and use a Bluetooth device as a modem
1. On your device, tap Start > Settings > Connections tab > Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection.
4. In the Select a modem list, tap Bluetooth.
5. Tap Next.
6. If the device appears in the My Connection list, skip to step 11.
To Next Page
Loading...