Drive S300 - 5.6 Resetting Your Pocket PC Phone

51
Having your contact information displayed on the Today screen on startup allows
for easy identification of the device in case it is lost.
1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Options tab, select the Identification information check box.
3. On the Options tab, select the Notes check box if you want
additional text displayed, such as: Reward if found.
4. On the Notes tab, enter the additional text.
Tip To display owner information on the Today screen, tap Start > Settings >
Personal tab > Today. On the Items tab, select the Owner Info check
box.
5.6 Resetting Your Pocket PC Phone
Occasionally you may need to reset your Pocket PC Phone. A normal (or soft) reset
of your device clears all active program memory and shuts down all active programs.
This can be useful when the device is running slower than normal, or a program is not
performing properly. A soft reset is also necessary after the installation of some
programs. If a soft reset is performed when programs are running, unsaved work will
be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be
performed only if a normal reset does not solve a system problem. After a hard reset,
the device is restored to its default settings — the way it was when you first
purchased it and turned it on. Any programs you installed, data you entered, and
settings you customized on the device will be lost. Only Windows Mobile software and
other pre-installed programs will remain.
To perform a soft reset
• Use the stylus to lightly press the RESET button on your device. The device
restarts and displays the Today screen.
To perform a hard reset
1. Tap Start > Settings > System tab > Master Clear
2. On the System tab, select the Master Clear icon (
)
3. Proceed to enter the confirmation code: 1234 and tap Reset, system will auto
reboot to complete the operation.