Owner's Manual
Drivecon Toll Free Ph: 1-800-374-8266
Drivecon reserves the right to alter or amend the above information without notice
Operating Environment Considerations
• Avoid direct sunlight
• Keep away from corrosive gas or liquid
• Keep away from oil, grease, and petroleum products
• Avoid exposure to rain or dripping water
• Avoid metal dust and dusty environments
• Avoid areas of high vibration
• Avoid extreme heat
• Keep away from high electro-magnetic interference or ultra-high frequency
energy sources. (such as arc welders or other similar machinery)
• Keep away from radioactive materials or environments
• Keep away from flammable material
• Keep surrounding area between -10 ~ +40°C.
Installation sit conditions will directly influence the service life of the
inverter. Please provide a suitable location.
Indoor mounting: 0°C - 50°C Humidity should be under 95% RH non-condensing.
Outdoor mounting: -10°C - 40°C for inverters located outside cabinet. Humidity should be
under 95% RH non-condensing.
A-6
To Next Page
