Drobo5N2 User Guide 204
5.
Enter a password and confirm the password by re-typing it in the appropriate text boxes.
Note:
The password you enter must match the one you enter for the destination, or target.
6.
In the IP Address text box, enter the IP address of the target Drobo device.
Tip:
To find the IP address for the target, you need to navigate to that Drobo device on the All
Devices page and select it, log in with your administrator username and password for that
device, and then click the Settings option on the Navigation menu, and click Network. The IP
address appears on this page.
Warning:
The source discovers the target by its IP address. If the IP address of the target changes
after setup, the synchronization will fail.
7.
Optional: You can now schedule a synchronization by selecting a start time and interval from the
drop down lists.
8.
Click the OK button.
This Drobo device is now configured as the source for data replication.
Related topics:
Configuring the Destination Drobo Device
Using DroboDR to Replicate Data
To Next Page
Loading...
