Drobo 5N2 - Page 27

Drobo5N2 User Guide 27
you want to allow changes to your computer. Click the Allow or Yes button. This installs the Drobo
Dashboard.
9.
After the installation is complete, be sure that the Launch Drobo Dashboard checkbox is
selected and then, click the Finish button.
10. The Drobo Dashboard application launches and you will be prompted to register your Drobo
5N2. You can either register the Drobo 5N2 or skip the step and register it later. Select an option
based on you preference. The serial number is printed on the compliance label at the bottom of the
device.