08
265
In the event of a breakdown
Removing the pipe and cartridge
F Turn the pipe assembly 2 to the left until it
contacts the unit.
F Disconnect the union 1 from the cartridge
by turning it a quarter turn anti-clockwise.
F Extract the pipe assembly 2, then
disconnect the union 3 from the air delivery
pipe by turning it a quarter turn anti-
clockwise.
Beware of discharges of fluid.
The expiry date of the fluid is indicated
on the cartridge.
The sealant cartridge is designed for
single use; even if only partly used, it
must be replaced.
After use, do not discard the cartridge
into the environment, take it to an
authorised waste disposal site or a
CITROËN dealer.
Do not forget to obtain a new sealant
cartridge, available from CITROËN
dealers or from a qualified workshop.
F Remove the pipe assembly 2.
F Support the compressor vertically.
F Unscrew the cartridge 4 from the bottom.
To fit the new cartridge and new pipe, carry out
these operations in reverse order.
To Next Page
Loading...
