08
266
In the event of a breakdown
Checking / adjusting tyre pressures
You can also use the compressor without
injecting any product, to check and if necessary
adjust your tyre pressures.
F Connect the compressor's electrical
connector to the vehicle's 12 V socket.
F Start the vehicle and let the engine run.
F Adjust the pressure using the compressor
(to inflate: switch B in position "I"; to
deflate: switch B in position "O" and press
button C), according to the vehicle's tyre
pressure label.
F Remove the kit then stow it.
F Turn the selector A to the "Air"
position.
F Uncoil the white pipe G fully.
F Connect the pipe to the tyre valve.
To Next Page
Loading...
