03
93
Ease of use and comfort
Driver's seat electric
adjustments
F Push the control forwards or rearwards to
slide the seat.
F Tilt the rear part of the control upwards or
downwards to obtain the required height.
F Tilt the front part of the control upwards or
downwards to obtain the required angle.
F Tilt the control forwards or rearwards to
adjust the angle of the seat backrest.
The electrical functions of the driver's seat are deactivated approximately one minute after
the ignition is switched off.
To reactivate them, switch on the ignition.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat.
There is a risk of trapping or pinching passengers if present in the rear seats or jamming the seat if large objects are placed on the floor behind
the seat.
Forwards-backwards Cushion height and angle Seat backrest angle
To Next Page
Loading...
Need help?
General
