03
94
Ease of use and comfort
Additional adjustments
F To raise a head restraint, pull it upwards.
F To lower the head restraint, press the lug A
and the head restraint at the same time.
F To adjust the angle of the head restraint, tilt
its lower part forwards or rearwards.
The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Removing a head restraint
F To remove the head restraint, press the
lug A and pull the head restraint upwards.
F To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back and press the lug A at the same time.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Head restraint height and angle
To Next Page
Loading...
