DSC LE4000 User Manual

12
[013] DLS Outgoing Port
Default (0BFA/3066)
The DLS Outgoing Port is used for outgoing session to DLS 5 after an SMS request has been
sent to the Communicator. Use this section to set the value of the local outgoing port. The
value must be changed if the Communicator is located behind a firewall and must be assigned
a particular port number, as determined by your network administrator. In most cases,
changing the default value or configuring your firewall with this port is not required.
Valid range: 0000-FFFF.
[020] Time Zone
Default (00)
Use Column 2 (Offset Hours) to find your local Time Zone. Record the 2-digit hex value from
Column 1 (HEX Value) on the same row. Program this hex value for your Time Zone. Valid
range is 00 - FF.
Table 7: World Wide Time Zones
HEX
Value
Offset
Hours
Std
Abbrev
Location
01 -12 BIT Baker Island Time
05 -11
NUT Niue Time
SST Somoa Standard Time
09 -10
HAST Hawaii-Aleutian Standard Time
THAT Tahiti Time
TKT Tokelau Time
CKT Cook Island Time
0B -9.5 MIT Marquesas Island Time
0D -9
AKST Alaska Standard Time
GIT Gambier Island Time
11 -8
PST Pacific Standard Time
PST Pitcarirn Standard Time
CIST Clipperton Island Standard Time
15 -7 MST Mountain Standard Time
19 -6
CST Central Standard Time
GALT Galapagos Time
PIT Peter Island Time
EAST Easter Island Standard Time
1D -5
EST Eastern Standard Time
COT Colombia Time
ECT Ecuador Time
PET Peru Time
ACT Acre Time
1F -4.5 VST Venezuela Standard Time
21 -4
AST Atlantic Standard Time
CLST Chile Standard Time
BWST Brazil Western Standard Time
SLT San Luis Time
PYT Paraguay Time
JFST Juan Fernandez Island Standard Time
GYT Guyana Time
FKST Falkland Island Standard Time
BOT Bolivia Time
23 -3.5 NST Newfoundland Standard Time

DSC LE4000 Specifications

General

Brand	DSC
Model	LE4000
Category	Cell Phone
Language	English