DSC LE4000 User Manual

17
[029] Cellular 2 Transmission
Default (00)
Program 00 to disable this event transmission or FF to enable. See System Test Options
(above) for details on settings.
NOTE: The time interval (in minutes) between periodic tests is programmed in section [225]
(Cellular).
[030] FTC Restore
Default (FF)
Program 00 to disable this event transmission or FF to enable. This event occurs when an FTC
Trouble on the system restores.
[031] Priority Tamper Alarm
Program 00 to disable this event or FF to enable. This event occurs when panel tampered
during the entry delay.
[032] Priority Tamper Restore
Program 00 to disable this event or FF to enable. This event occurs when panel tamper
restored.
Table 9: Priority Temper Restore
[033] Communicator Firmware Update Begin
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
communicator firmware update begins.
[034] Communicator Firmware Update Successful
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
communicator firmware updated successfully completed.
[035] Panel Firmware Update Begin
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware update begins.
[036] Panel Firmware Update Successful
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware updated successfully.
[037] Panel Firmware Update Fail
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware updated has failed.
Event
SIA
Identifier
SIA
Reporting
Code
Contact ID
Qualifier
Contact
ID Event
Code
Contact ID
Reporting
Code
Contact ID
User/Zone
Priority
Tamp er
BA 000 1 1 37 000
Priority
Tamper
Restore
BR 000 3 1 37 000

DSC LE4000 Specifications

General

Brand	DSC
Model	LE4000
Category	Cell Phone
Language	English