36
TEST / MISC:
601 MANUAL TEST Test-Manually Triggered (Restore Not Applicable)
602 PERIODIC TEST Test-Periodic (Restore Not Applicable
603 Periodic RF Xmission Test-Periodic Radio (Restore Not Applicable)
604 FIRE TEST Test-Fire Walk Test-User #
605 Status Report To Follow Test-Fire Walk Test-User #
606 LISTEN-IN TO FOLLOW Listen-Listen-In Active (Restore Not Applicable)
607 WALK-TEST MODE Test-Walk Test Mode-User #
608 System Trouble Present Test-System Trouble Present (Restore Not Applicable)
609 VIDEO XMTR ACTIVE Listen-Video Xmitter Active (Restore Not Applicable)
611 POINT TESTED OK Test-Point Tested OK-# (Restore Not Applicable)
612 POINT NOT TESTED Test-Point Not Tested-# (Restore Not Applicable)
613 Intrusion Zone Walk Tested Test-TntrnZone Walk Test-# (Restore Not Applicable)
614 Fire Zone Walk Tested Test-Fire Zone Walk Test-# (Restore Not Applicable)
615 Panic Zone Walk Tested Test-PA Zone Walk Test (Restore Not Applicable)
616 Service Request Trouble-Service Request
EVENT LOG:
621 EVENT LOG RESET Trouble-Event Log Reset (Restore Not Applicable)
622 EVENT LOG 50% FULL Trouble-Event Log 50% Full (Restore Not Applicable)
623 EVENT LOG 90% FULL Trouble-Event Log 90% Full (Restore Not Applicable)
624 EVENT LOG OVERFLOW Trouble-Event Log Overflow (Restore Not Applicable)
625 TIME/DATE RESET Trouble-Time/Date Reset-User # (Restore Not Applicable)
626 TIME/DATE INACCURATE Trouble-Time/Date Invalid (clock not stamping to log correctly)
627 PROGRAM MODE ENTRY Trouble-Program Mode Entry (Restore Not Applicable)
628 PROGRAM MODE EXIT Trouble-Program Mode Exit (Restore Not Applicable
SCHEDULING:
630 Schedule Change Trouble-Schedule Changed (Restore Not Applicable)
631 Exception Sched. Change Trouble-Esc. Sched. Changed (Restore Not Applicable)
632 Access Schedule Change Trouble-Access Sched. Changed (Restore Not Applicable)
PERSONNEL MONITORING:
641 Senior Watch Trouble Trouble-Senior Watch Trouble – This code is also referred to as ‘up and
about’. It means that a person has not moved about their home for a
preset period of time.
642 Latch-key Supervision Status-Latch-key Super-User # (Restore Not Applicable) Used to
report when a certain user has returned home and disarmed the alarm.
SPECIAL CODES:
651 Code sent to Identify the control panel as an ADT Authorized Dealer.
750-789 These codes are used by Protection One and can be assigned any
unique non-standard Event code, which Pro 1 will be tracking. Also can
be used on custom zone types.
Miscellaneous:
654 System Inactivity Trouble – System Inactivity
900 Download Abort Remote – Download Abort (Restore not applicable)
901 Download Start/End Remote – Download Start - #
Remote – Download End - #
902 Download Interrupted Remote – Download Interrupt - #
910 Auto-Close with Bypass Closing – Auto Close – Bypass - #
911 Bypass Closing Closing – Bypass Closing - #
Other:
999 1 and 1/3 DAY NO READ LOG EVENT LOG ONLY, No report to CS. V20/lynx series or may occur in
Vista-50 family after a download is done where the account has been
transferred from one panel type to another. (i.e. from and XMP to a
50P, etc).
To Next Page
Loading...
