DSIC Mobilebase DS4A - OS Update; USB Driver

41
OS Update
You shall need to download file as “DS4A-p-XXX.zip” from the FTP server.
Update Instruction
Download your OS and install on your device as below
- Copy the firmware file to root folder of the SD card
- Input micro SD card into your device
- WHILE pressing and holding ESC + 2 simultaneously, make a long press of Reset key to
start your device and enter OS update screen.
- When OS image file has been copied and installed completely, Success will be displayed on your device
screen.
- After the Success message, make a long press power button for 10 secs to turn off.
- Make a long press of Power Button to restart your device
For latest OS, please contact your sales, or access to Mobilebase ftp. (You can get the information regarding
Mobilebase ftp from your sales manager)
USB Driver
If you are Android developer, please download from below link and install on your PC before you connect DS4A to
your PC. This is shell for ADB synchronization between your PC and DS4A.
ADB: Android Development Bridge
This driver is useful when you have “Unknown device” message at your PC while you are connecting DS4A to your
PC.
https://www.dropbox.com/s/zkfqn3hesnnr60v/DS9_usb_driver.zip?dl=0