Stored LAP erase function
This function erases the stored LAPs. To access the
function it is necessary to view the "setting" menu
page 73, use button (1) or (2) to select the "LAP"
function and press reset button (4) to go to next page.
Use button (1) or (2) to select "LAP DATA" indication
and press the reset button again (4) to enter the page
showing the previously recorded lap times.
Highlight the "ERASE" item, use button (1) or (2) to
scroll through the stored LAPs to erase and press the
reset button (4) for 3 seconds.
Now, on the left-hand side of the display you have
"PLEASE WAIT…" and then, to confirm deletion,
"ERASE OK" appears for 2 seconds. You will notice
that no stored data will be present any more and "NO
LAP" message will be displayed.
To exit, select "EXIT" and press the reset button (4).
100
To Next Page
Loading...
