"Trip 1" meter
This function allows displaying the indication of the
partial distance travelled (Km or miles according to
the specific application). When this function is
accessed and button (1) is kept pressed for 3
seconds, trip meter will be reset. When the reading
exceeds 9999.9, distance travelled is reset and the
meter automatically starts again.
Note
When this reading is reset, also "Average
Consumption", "Average Speed" and "Trip Time"
functions are reset.
Note
Whenever the system unit of measurement is
changed from the "SET UNITS" function of the Setting
menu or in case of power off (Battery Off), the
distance travelled is reset and the meter starts
counting from zero again (considering the new set
units of measurement).
To Next Page
Loading...
