Ducati Diavel - DEFAULT function (Resetting Ducati default parameters)

DEFAULT function (Resetting Ducati
default parameters)
This function resets the parameters set by Ducati for
each riding style. To access the function it is
necessary to view the "setting" menu page 73, use
button (1) or (2) to select the "RIDING MODE"
function, and press the reset button (4) to go to next
page. Use button (1) or (2) to select the riding mode
to be reset to default (initial) parameters and press
button (4) to go to the next page; now use button (1)
or (2) to select the "DEFAULT" indication.
To restore original default parameters, keep the reset
button (4) pressed for 3 seconds. To restore
parameters, the system needs approximately 3
seconds; meanwhile, "PLEASE WAIT..." indication is
displayed. Once procedure is completed, the display
shows "DEFAULT OK" to confirm that parameters
have been reset to factory settings.
DTC DEFAULT
SPORT
ENGINE
EXIT
PLEASE WAIT...
DEFAULT OK
DTC DEFAULT
SPORT
ENGINE
EXIT
SPORT TOURING
RIDING MODE
URBAN
EXIT
4
4
4
4
Fig. 46
85