Indicator "TRIP TIME" - Trip time
This function indicates vehicle trip time. The
calculation considers the time since Trip 1 was last
reset. When Trip 1 is reset, this value is reset as well.
The calculation active phase occurs when the engine
is running even if the motorcycle is stopped (the time
is automatically stopped when the motorcycle is not
moving and the engine is OFF and restarts when the
counting active phase starts again).
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.
Note
If you change the unit of measurement for an
item connected to "speed" (and distance) or
"consumption" using the "SET UNITS" function of the
Setting menu, the trip time value will be automatically
reset.
To Next Page
Loading...
