Ducati Diavel - Coolant temperature

Coolant temperature
This function indicates coolant indication state.
The temperature unit of measurement can be
selected (°C or °F).
The reading is indicated as follows:
- if the reading is between - 39°C and +39°C (-38°F
and +102°F) "LO" is shown on the instrument
panel (steady);
- if the reading is between +40°C and +120°C
(+104°F and +248°F) it appears on the
instrument panel (steady);
- if the reading is +121°C (+250°F) or higher, "HI"
is shown on the instrument panel (flashing).
Note
If the sensor is in fault, the three flashing dashes
("- - -") will be displayed and, at the same time, the
"Engine/Vehicle Diagnosis - EOBD" light will come on.
Fig. 8
27