Ducati Diavel - Page 200

Connect the positive cable (10), previously
assembled to ABS cable (11), to battery positive
terminal, and negative cable (12) to battery negative
terminal, by starting the other screw (9).
Tighten the terminal screws (9) to a torque of 5 Nm
±10% and apply grease onto the battery terminals to
prevent oxidation.
Reinstall the battery (8) in the support, positioning
cables (10) and (11) as shown in (Fig. 152).
9
12
108 11
Fig. 151
11
8
10
Fig. 152
199