19
E
Current fuel consumption function (fig. 11)
When the motorcycle is in motion with the engine running
the display will show a numerical value corresponding to the
current fuel consumption. If the motorcycle is stopped with
the engine running the display will show fixed lines “- -. -”.
With the engine stopped and the motorcycle at a
standstill the display shows “0.0”.
Average fuel consumption function
(fig. 11)
When the motorcycle is in motion with the engine
running the display will show a numerical value
corresponding to the average fuel consumption.
When the trip counter is zero reset, the display will
show three lines “- -. -”; the value will be updated once
the bike has travelled 2 km.
When the motorcycle is stationary, or stationary with
the engine running, the latest value to be recorded will
remain on the display until it is updated.
km/L
mpg
km/L
mpg
fig. 11
To Next Page