18
E
Odometer function (fig. 10)
Indicates the total distance travelled.
Trip counter function
(fig. 10)
Indicates the distance travelled since last reset. The trip
counter can be reset at any time by accessing the relative
display function and pressing button A fig. 5for at least
2 seconds. When the trip counter reaches 9999.9 km
(or miles) it resets itself automatically.
When the trip counter is reset, the following parameters
are also reset: average speed, average consumption,
and fuel used.
Fuel trip counter function
(fig. 10)
Indicates the distance travelled since illumination of the
fuel reserve warning light (10, fig. 6).
The display will automatically switch from the odometer
to the fuel trip mode and start to count the distance
travelled from that point.
Average speed function
(fig. 10)
Shows the average road speed of the motorcycle.
The average speed is calculated starting from the
most recent trip counter reset.
When the motorcycle speed reaches 280 km/h (174 mph)
the display shows a series of lines “- - -”.
km
miles
km/h
mph
km/h
mph
km
miles
fig. 10
km
miles
km/h
mph
km
miles
ONLY IF ON
To Next Page