menu - Riding Mode - DTC
This function allows the intervention level of
the DTC traction control system or deactivating it.
●
Use (1) and (2) from the Interactive
Menu to select the menu item and press
ENTER (3).
●
Select the Riding Mode item and press ENTER
(3).
●
Select the Riding Mode you wish to customise
and press ENTER (3).
●
Select the DTC item and press ENTER (3).
Levels from 1 to 8 and are displayed on the
side. While the currently set level is shown on
the right. The motorbike is shown in the middle with
the involved in the highlighted and the
reference indications.
Use (1) and (2) to scroll and select the desired
level. Press ENTER (3) to confirm and quit the
menu.
When the DTC is set to the DWC is also
automatically set to so both the wheelie control
and the vehicle dynamics stabilisation control are
deactivated.
Fig 116
Fig 117
130
To Next Page
Loading...
Need help?
General
