menu - Riding Mode -
Default
This function allows restoring the values of the
parameters linked to the Riding Modes set by
Ducati, and is visible only if the parameters have
been previously modified.
the parameters for a single Riding
Mode:
●
Use (1) and (2) from the Interactive
Menu to select the menu item and press
ENTER (3).
●
Select the Riding Mode item and press ENTER
(3).
●
Select the Riding Mode you wish to customise
and press ENTER (3).
●
Select the Default item and press ENTER (3).
The message Wait… is displayed for a few
seconds followed by the message Default Ok.
Then Default disappears from the menu list.
Fig 124
151