Clutch lever
Lever (1) disengages the clutch. It features a dial
adjuster (2) for lever distance from the handgrip on
handlebar. The lever distance can be adjusted
through 10 clicks of the dial (2). Turn clockwise to
increase lever distance from the handgrip. Turn the
adjuster anticlockwise to decrease lever distance.
When the clutch lever (1) is operated, drive from the
engine to the gearbox and the drive wheel is
disengaged. Using the clutch properly is essential to
smooth riding, especially when moving OFF.
Set clutch lever when motorcycle is stopped.
Using the clutch properly will avoid damage to
transmission and spare the engine.
Note
The engine can be with the side stand
down and the gearbox in neutral. If with a
gear engaged, pull in the clutch lever (in this case the
side stand must be up).
Fig 47
59
To Next Page
Loading...
Need help?
General
