Duke TSC - Programming Controls

18
Installation and Operation of: TSC - TSCM Retrot
PROGRAMMING CONTROLS
RECIPE EDIT PROGRAMMING INSTRUCTIONS
1. Touch the button and then enter pin code
5 6 7 8 and Touch the button when
prompted.
2. Touch the button for the recipe you want to edit
(i.e.
BREAD
).
NOTE: The 6 oven recipes are listed in the top 3
rows and the 6 proofer recipes are listed in the
bottom 3 rows.
3. To edit Time, Temperature or Humidity (Proofer
Only), touch the
or button adjacent to
the eld you want to change. Touch the
button to save the changes.
NOTE: You must touch the button in each
eld to save the changes you made.
FIGURE: Recipe Edit Selection Screen
Figure: Main Tool Bar
Figure: Special Functions Screen
To access the SPECIAL FUNCTIONS, touch
button on the Main Tool Bar.
4. To edit the recipe name, touch the
button for
the EDIT RECIPE NAME screen.
NOTE: Typing will add letters/characters to the
end of the text.
PRESS:
• TO TOGGLE THE KEYBOARD BETWEEN
THE UPPER/LOWER CASE CHARACTER SET.
• , AND FOR THE NUMBER AND
SYMBOL KEYBOARDS.
• TO SPACE
• TO CLEAR ALL TEXT
• TO DELETE/BACKSPACE