2010-04
17 / 44
-6-
Spazzatrice / Sweeper 100 Elite
- Girofaro:
1 lampada 12V - 55W; zoccolo base H1
Lampade gruppo luci posteriore (OPT)
- Per sostituire una lampada del gruppo luci posteriori
è necessario rimuovere il trasparente (1) svitando le
due viti (2).
- Spingere leggermente di lato la lampadina bruciata e
sostituirla.
La posizione delle lampade è la seguente:
Lampada (3): luci indicatori di direzione.
Lampada (4): luci di posizione.
- Rimontare il trasparente (1).
2
2
1
3
4
- Beacon:
1 lamp 12V - 55W; socket H1
Rear light cluster lamps (OPT)
- To replace one lamp of the rear light cluster it is
necessary to remove the transparent part (1) by
unscrewing the two screws (2).
- Slightly move the burnt lamp to the side and replace
it.
The lamp position is the following:
Lamp (3): turn indicator lights.
Lamp (4): position lights.
- Reassemble the transparent part (1).