Dungs MPA22 - Setting Motor Start Points; Configuring Air and Gas Motor Start Points

Printed in Germany / M-MT-BOS
• Edition11.99 • # 231 763
35 … 112
Display when the basic
configuration is entered
Press buttons 1 and 2 to confirm the software version.
Setting for the air motor's start point.
Valid settings are:
073 Ref. A 0° (0)
005 Ref. A 90° (1)
209 Ref. B 90° (2)
157 Ref. B 0° (3)
Setting for the gas motor's start point.
Valid settings are:
067 Ref. A 0° (0)
015 Ref. A 109° (1)
219 Ref. B 109° (2)
151 Ref. B 0° (3)
If you set an invalid start point, the cursor
returns to the start of the NOID display.
The selected start points are displayed (see numbers in parentheses in list of
valid settings)
Display during programming of the MPA with default values.
1
2
1
i
P
S
G
L/A
h
l,m
3
2
1
2
1
2
1
approx. 2 seconds
approx. 2 seconds
approx. 2 seconds
approx. 2 seconds
i
P
S
G
L/A
h
l,m
3
i
P
S
G
L/A
h
l,m
3
i
P
S
G
L/A
h
l,m
3
i
P
S
G
L/A
h
l,m
3
–
–
+
Inkrement value
Dekrement value
–
+
Dekrement value
Inkrement value